The integrated cleanroom corner panel system completely eliminates the various corner joints between the wall panel systems of clean room partitions, which ensures the flatness and smoothness of the wall panels and avoids the impact of joint cracking and leakage on the clean environment. Avoiding dust accumulation, which is more conducive to cleaning and process sterilization.
Payment:
TT/LCProduct Origin:
Shandong Province, ChinaColor:
Customized as your requestMOQ:
1000 Square MetersShipping Port:
Qingdao Port, ChinaLead Time：
20-30s days after receiving your depositIntegrated Cleanroom Corner Panel Systems For Pharmaceutical
Product Introduction:
Wiskind Integrated Cleanroom Corner Systems is divided into three types, which are integrated One Piece Cleanroom Circular Corner system, One Piece Cleanroom L-shaped Corner system, One Piece Cleanroom T-shaped Corner system, factory prefabrication, direct stitching on site, reducing the use of aluminum profiles, make the clean room more beautiful, more conducive to cleaning and process sterilization.
Product Description:
|
Product Name |
Integrated Cleanroom Corner Panel Systems For Pharmaceutical |
|
Width |
Width on both sides and no more than 1180 mm (Suggested equilateral 250 * 250 mm) |
|
Max Length |
6000mm |
|
Wall Thickness |
50mm |
|
Steel Facer Thickness |
0.4-0.8mm |
|
Outer Plate Material |
PPGI, Al-mg-Mn Alloy steel, SS steel, Ti-Zn steel, VCM |
|
Coating |
PE, PVDF, HDP |
|
Core Material |
rock wool |
|
Frame Thickness |
0.6mm |
|
Application |
Pharmaceutical Clean Room, Electronic Clean Room, Food Clean Room, etc. |
1.The Integrated Cleanroom Corner Systems completely eliminates various corner joints between wall panels, factory prefabrication, on-site splicing, and module installation is convenient and quick.
2.Nearly the ultimate guarantee of smooth and smooth siding, avoiding joint cracking, dust and leakage affect the clean environment, more conducive to cleaning and process sterilization.
3.Clean room partition wall system core material diversified, there are rock wool, PU, EPS, paper honeycomb, aluminum honeycomb and so on. According to different environments, fireproof, heat preservation, noise reduction, moisture proof, etc., choose different core materials, meet your different clean room requirements.
4.The cleanroom sandwich panel coating and material are selected according to the working environment. The modular cleanroom sandwich wall panel can directly open the hole and reserve the line pipe to improve the installation efficiency.
5.Widely used in clean rooms such as pharmaceuticals, electronics, and food industry.
WP3 corrugated steel sheets is the mainly product of our company, it has 32mm high rib with equal width and large wave spacing, suitable for large-scale buildings; the lap joint of the two ribs is provided with a cavity to block capillary water, which has good rainproof performance; the end is pre-punched with screw holes, and the raw materials are usually 0.53-0.8mm thick, 300 or 350MPa Strength galvanized color-coated steel plate.
DFP555 Closed Type Metal Decking Sheet Series is developed by Wiskind with the help of Tianjin University.This floor decking system is connected to concrete par by shear force connecting piece.This combined floor decking series fully use the advantage of the two materials.The advantages of the floor decking system are light weight,high strength, big stiffness, easy construction and industrial production.
COLORCURTAIN Sandwich Façade Panel, is a new type of metal curtain wall panel,with fire prevention, heat preservation and decoration function.Factory prefabricated,module mounted,the wallboard can be replaced separately--is a maintainable wall panel,can produce special-shaped. Produced through a discontinuous production process, able to becustomized as per client needs, with superior flatness and crisp visualeffects. The use of high-quality roll-coated aluminum panel ensuresoutstanding corrosion resistance, thus improving the overall servicelife of the building.
W900 Corrugated Metal Interior Wall Panels is usually used as roof or wall lining board, large canopy lining board, placed inside the main purlin.It is also the most common type of corrugated wall panels in the market.
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
online service
+86-153 1435 3017
market@wiskind.com
+86-153 1435 3017
English
русский
español
العربية
日本語
한국의
ไทย
Việt
Indonesia
українська
