780 Big Wave Wall Panel Corrugated Steel Wall Sheets
Wiskind 780 corrugated steel wall sheets is mainly used for wall panels, generally horizontally installed, beautiful in appearance and three-dimensional.
Payment:
TT/LCProduct Origin:
Shandong Province, ChinaColor:
Customized as your requestMOQ:
500 square metersShipping Port:
Qingdao Port, ChinaLead Time:
20-30s days after receiving your deposit1 Product Parameters:
Name of Product |
W900 |
Raw material width(mm) |
1000 |
Length(mm) |
900 |
Thickness(mm) |
0.3-1.0 |
Color |
Customed |
Material |
Color-coated plate, aluminum-zinc-magnesium steel plate, aluminum-magnesium-manganese |
2 Product Characteristics:
Common standard panel types with aesthetic and economical cross-sections.
-Placed inside the main purlin as roof, wall lining, or large canopy lining.
-Conceal insulation materials and purlins to make the interior of the building more beautiful.
-With a relatively low wave height, it is generally not suitable for application in conjunction with insulation cotton. --When it has to be used in combination with insulation cotton, the thickness of the cotton felt should not be greater than 50mm.
-Produced with color coated ordinary-strength steel panel with a thickness of 0.43mm.
-Able to be used as perforated acoustical panel.
Advantages:
-The utilization rate is high, and it is mostly used for on-site composite roof inner panels and wall inner and outer panels, and sometimes can also be used in small roofs. Beautiful and economical section, the standard plate type in the market.
-Shade insulation and purlins for a more aesthetically pleasing building interior.
-The wave height is relatively low, so it is generally not suitable for use with thermal insulation cotton. When it must be combined with thermal insulation cotton, the thickness of the cotton felt should not be greater than 50mm.
-Perforated sound-absorbing panels can be used.
-Matters needing attention: When making the inner roof panel, it is necessary to confirm whether it is covered with purlins (positive and negative pressure). The headquarters has one set for Yantai equipment. The wave crest is different from the headquarters equipment, and can process medium-strength G350. For high-strength plates, the recommended thickness is within 0.6, and the yield strength is 300-350MPa
4 Wiskind Lining Panel Façade Systems:
The lining panel can be used indoors to provide a flat visual effect and increase the span. It can be deployed vertical, horizontal or inclined to building lines, so that the designer is allowed more freedom to carry out multi-dimensional creations.
The panel can be fixed directly to the interior wall or ceiling.
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.